15 basic methods for making cotton curtain

one

To the flower shape

Before cutting the fabric, the first step is to identify the pattern of the fabric. 90% of all printed curtain fabrics, embroidered curtain fabrics, and jacquard colored woven fabrics have flower positions. Identifying the flower positions and displaying the most beautiful pattern is crucial for the overall effect of the cotton curtain.

two

Cutting and retrieving materials

After finding the flower position, you can cut the fabric. It should be noted that. We cut the fabric according to the flower position, so sometimes the fabric is slightly wider or narrower, and it doesn't matter if it's in the tens or twenty centimeters. It's just that the size of the fabric on both sides is not very important

three

Trimming

After the fabric is cut, the edges need to be treated neatly, otherwise it is easy for the car to tilt and affect the overall effect.

four

Color cloth splicing

After repairing the edges, we need to put on the matching colored cloth. Of course, if you don't use colored cloth, let's skip this point. The splicing of colored fabrics should be smooth and straight.

five

Car non-woven fabric belt

Take the non-woven fabric onto the cart, the key is not to tilt the cart, otherwise it won't look good when hung up.

six

Curl side edge

Turn the fabric on both sides, ensuring that the width of the car is consistent. No wrinkle, no tilt.

seven

Pleating and folding

Fold the fabric at the originally set discount factor. The spacing between folds should be evenly distributed and of the same size. If it's a Roman pole, just drill a hole directly.

eight

Joint and side ironing

Use an electric iron to iron and tidy up all the car joints.

nine

Insert small pointed hook

Insert the small pointed hook into the middle of the folded non-woven fabric belt, and make sure that the top of the small pointed hook is level with the top of the fabric after being inserted and pulled flat, without any height difference.

ten

Vertical measurement height

After the small hook is made, hang it up and measure the height. If the height of the window exceeds 2.8, it needs to be extended during splicing. In addition, if some fabrics are embroidered curtain fabrics, and there are water-soluble edges at the bottom, they cannot be cut off. When making non-woven fabric belts, it is necessary to ensure good height.

eleven

Trim the bottom edge

Measure the height and cut off any excess parts according to the required height.

twelve

Lead wire and lead block

Add lead blocks or wires to the bottom edge, and the purpose of adding curtain lead blocks is to increase the drape of the fabric, making it more draped and less susceptible to wind drift.

thirteen

Sew bottom edge

After adding the lead block, fix the bottom edge.

fourteen

Bottom edge ironing

Flatten the bottom edge.

fifteen

Check installation

Carefully inspect the cotton curtain that have been made, clean all the threads, and then ask the installer to take them for installation.